Extra Parts For Your FiTechVW System.

6' foot Data cord.

This cord connects the controller cord to Fitech main unit. 6'
long, straight to straight ends. You will need to lengthen the
controller power cord (red and black) same 6' to match.
This will give you 12' feet total.
$24.99
12' foot Data cord.

This cord connects the controller cord to Fitech main unit. 12'
long, straight to straight ends. You will need to lengthen the
controller power cord (red and black) same 12' to match.
This will give you 18' total
$34.99
Type 3 dip stick block off taped 3/8" NPT

(used on temp sensor with FiTechVW kit)
Most after market cases and all aluminum super case
come with the port and mounting studs already installed.
This is a great location to give temp readings
for the FiTechVW systems.
(included in all FitechVW Kits)  
$12.99
FiTechVW Fuel Install Kit. Black AN -6

Includes: 600hp VWTurboKits fuel pump, black anodized
rubber clamp mount, AN in/out -6 pump fittings, WIX fuel
filter, Red Horse AN Push-Loc -6 black fittings, IDEA clamps,
10' USA 3/8" Hy-PSI hose, 25' Fuel Max 3/8" aluminum line,
Lowbugget aluminum VW Tank fitting, New Stock VW style
tank screen, Red Horse AN -6 "T" fitting,
$269.99
FiTechVW Fuel Install Kit. Red and Blue AN -6

Includes: 600hp VWTurboKits fuel pump, black anodized
rubber clamp mount, AN in/out -6 pump fittings, WIX fuel
filter, Red Horse AN Push-Loc -6 Red and Blue fittings, IDEA
clamps, 10' USA 3/8" Hy-PSI hose, 25' Fuel Max 3/8" aluminum
line, Lowbugget aluminum VW Tank fitting, New Stock VW
style tank screen, Red Horse AN -6 "T" fitting,
(Red and Blue AN Fittings Kit)
$269.99
50PSI FiTechVW Blow-Through Top Hat.

Machined and TIG welded in-house in our Orange, Ca shop.  
Has single 2" inlet pipe. Stands 2 1/2" tall. Has thick and
super strong rubber O-Ring seal good for 50psi use. (can be
used on Holley carbs also). Comes with mounting stud, one
piece rubber seal-washer and wing-nut. Powder Coated Black
wrinkle finish matching all black FiTechVW and FiTech units.

$159.99

Replacment O2 sensor for use with all Fitech units.
$99.99
Replacement data and power cable for controller. 18 feet long
$59.99
Replacement fuel pump harness 2-pin
$19.99
Replacement main wire harness "A" 4-pin
$39.99
Temperature sensor 3/8 NPT
$39.99
Handheld for 2020 and older style units
$169.99
600 Hp fuel pump *includes braket*
$169.99
FiTech to weber adapter flange *includes hardwere and gaskets*
$89.99
Type 1 intake manifold (Fits on bug/bus/ghia and offroad
application) also used on two barrel blow thru with adapter flange
$229.99
4 barrel draw thru manifold 3" inlet
$249.99
1 Replacement 150 hp injector for power adder unit
$89.99
4 Replacement 150 hp injectors for power adder unit
$349.99
1 Replacement for 100 hp injector for 2- barell
$79.99
4 Replacement for 100 hp injector for 2- barell
$309.99
Pro-Billet Locked-Out distributor for use with our
Injection systems.
Click here