| Weber parts and labor Replacement tuning parts necessary for fine tuning any high performance engine using Weber carburetors. We have venturies, main and air, correction jets, emulsion tubes, idle jets and gaskets for all of the most popular Weber down draft carburetors. |
IDA Carb AN Fittings.
Click Here
IDA THROTTLE SEALED BEARINGS
Replace those old worn out bearings and get rid of the extra play at the same time.
Sealed bearings (need four for 1 pair of IDA carbs) $9.95 each
WEBER REBUILD KITS
Complete kits to get the most out of your Weber carb when it’s time to overhaul. Kits include all the
parts to totally freshen up a “tired” carb.
Click Here for Rebuild Kits
IDA fuel filters $15.95 each
IDA throttle buterflys $9.95 each
WEBER MAIN JETS FOR 40IDF, 44IDF AND IDA CARBS
110 150 190
115 155 195
120 160 200
125 165 210
130 170
135 175
140 180
145 185 $12.99 each or $49.99 for 4.
AIR JETS FOR 40IDF, 44IDF AND IDA CARBS
120 185
130 190
140 200
150 205
160 210
170 220
175 225
180 $ 12.99 each or $49.99 for 4.
IDLE JETS FOR 40IDF and 44IDF
040,045,050,055,060,065
$12.99 each or $49.99 for 4.
IDLE JETS IDA
045,050,055,060,065
$12.99 each or $49.99 for 4.
Hex Jet Extension
$19.99 each
Glass Ball Needle Valves for IDA carbs
$34.99 each
40 IDF VENTURIES
28mm and 32mm
$49.99 for a pair or 4 for $94.99
44 IDF VENTURIES
32mm and 36mm
$54.99 for a pair or 4 for $104.99
48 and 52mm IDA VENTURIES
48 IDA Billet Venturis
available in 40mm, 42mm, 44mm, 45mm, 46mm, 48mm
$99.95 set of 4
PROGRESSIVE JET KIT
Performance tuning of the popular progressive carb is now available with the this
complete jet Kit. A complete range of main and air jets are included in the twelve sizes. Now it’s
possible to obtain maximum power from your progressive carb installations no matter what cam,
head, or cc combination you have. Replacement jets for Jet Kit are also available, be sure to specify
size.
1599-10 Progressive Carb Jet Kit, 24 Pcs. $94.99
CARBURETOR BASE GASKETS – 10-PIECE PACKS
•Top-quality replacement gaskets and Precision die-cut to match carb base
•Seals against all leaks
35068 = Weber Progressive DFEV $8.99
35035 = Weber 48 IDA,DCOE $8.99
35144 = Weber 40 IDF / Dellorto 36/40/45 DRLA $8.99
35145 = Weber 44 IDF $8.99
35146 = Weber 48 IDF/Dellorto 45 DRLA $8.99
CARBURETOR SYNCROMETER
•Keeps dual carburetors operating in unison
•Easy to use, saves time and money
Syncrometer $54.99
CARB SYNC ADAPTERs
Molded from durable Urethane, these sync adapters fit easily atop carbs without removing the air
cleaner mounting stud. Carb sync adapters accepts most Carb Synchrometers and our
Solex Kadron Carb Sync Adapter $18.99
ICT Weber Carb Sync Adapter $14.99
VELOCITY STACK COVER
Fits carbs with velocity stacks. Made of long-wearing vinyl. A must for cars, such as drag racers,
without air cleaners. Sold in Black only.
Velocity Stack Cover, 48 IDA, 4x for $39.99
Velocity Stack Cover, 40-48 IDF, 4x for $39.99
WEBER CARB LABOR:
Replace throttle bearings $85 Parts and Labor. Pair of carbs.
Drill 3rd hole and or 4th hole progression ports. $55 for a pair of carbs.
Change out butterflies for new 48mm brass. $55
Change out butterflies and throttle bearings. Includes new butterflies and sealed bearings.
$175 for the pair
Bore 48mm IDA open to 52's includes parts and labor for a pair of carbs. $ 475
Open float bowls for extra fuel $40 each.
Bore 2x carbs to 52mm, open bowls, replace all 4 throttle bearings, drill 3rd hole progression port.
$549.99 for a pair of IDA carbs, Rebuild of carbs if needed not included.
WEBER CARB MANUALS
All you need to know about those great Weber Carbs.
Both contain tuning tips and rebuilding information.
Weber Tech Guide $19.99
How To “AII About Weber Carbs” $24.99
DELLORTO CARBS
Complete manual covering all aspects of Dellorto carbs,
a must have book if you run Dellorto’s.
7054 AII About Dellorto Carbs $19.99
Click Here
IDA THROTTLE SEALED BEARINGS
Replace those old worn out bearings and get rid of the extra play at the same time.
Sealed bearings (need four for 1 pair of IDA carbs) $9.95 each
WEBER REBUILD KITS
Complete kits to get the most out of your Weber carb when it’s time to overhaul. Kits include all the
parts to totally freshen up a “tired” carb.
Click Here for Rebuild Kits
IDA fuel filters $15.95 each
IDA throttle buterflys $9.95 each
WEBER MAIN JETS FOR 40IDF, 44IDF AND IDA CARBS
110 150 190
115 155 195
120 160 200
125 165 210
130 170
135 175
140 180
145 185 $12.99 each or $49.99 for 4.
AIR JETS FOR 40IDF, 44IDF AND IDA CARBS
120 185
130 190
140 200
150 205
160 210
170 220
175 225
180 $ 12.99 each or $49.99 for 4.
IDLE JETS FOR 40IDF and 44IDF
040,045,050,055,060,065
$12.99 each or $49.99 for 4.
IDLE JETS IDA
045,050,055,060,065
$12.99 each or $49.99 for 4.
Hex Jet Extension
$19.99 each
Glass Ball Needle Valves for IDA carbs
$34.99 each
40 IDF VENTURIES
28mm and 32mm
$49.99 for a pair or 4 for $94.99
44 IDF VENTURIES
32mm and 36mm
$54.99 for a pair or 4 for $104.99
48 and 52mm IDA VENTURIES
48 IDA Billet Venturis
available in 40mm, 42mm, 44mm, 45mm, 46mm, 48mm
$99.95 set of 4
PROGRESSIVE JET KIT
Performance tuning of the popular progressive carb is now available with the this
complete jet Kit. A complete range of main and air jets are included in the twelve sizes. Now it’s
possible to obtain maximum power from your progressive carb installations no matter what cam,
head, or cc combination you have. Replacement jets for Jet Kit are also available, be sure to specify
size.
1599-10 Progressive Carb Jet Kit, 24 Pcs. $94.99
CARBURETOR BASE GASKETS – 10-PIECE PACKS
•Top-quality replacement gaskets and Precision die-cut to match carb base
•Seals against all leaks
35068 = Weber Progressive DFEV $8.99
35035 = Weber 48 IDA,DCOE $8.99
35144 = Weber 40 IDF / Dellorto 36/40/45 DRLA $8.99
35145 = Weber 44 IDF $8.99
35146 = Weber 48 IDF/Dellorto 45 DRLA $8.99
CARBURETOR SYNCROMETER
•Keeps dual carburetors operating in unison
•Easy to use, saves time and money
Syncrometer $54.99
CARB SYNC ADAPTERs
Molded from durable Urethane, these sync adapters fit easily atop carbs without removing the air
cleaner mounting stud. Carb sync adapters accepts most Carb Synchrometers and our
Solex Kadron Carb Sync Adapter $18.99
ICT Weber Carb Sync Adapter $14.99
VELOCITY STACK COVER
Fits carbs with velocity stacks. Made of long-wearing vinyl. A must for cars, such as drag racers,
without air cleaners. Sold in Black only.
Velocity Stack Cover, 48 IDA, 4x for $39.99
Velocity Stack Cover, 40-48 IDF, 4x for $39.99
WEBER CARB LABOR:
Replace throttle bearings $85 Parts and Labor. Pair of carbs.
Drill 3rd hole and or 4th hole progression ports. $55 for a pair of carbs.
Change out butterflies for new 48mm brass. $55
Change out butterflies and throttle bearings. Includes new butterflies and sealed bearings.
$175 for the pair
Bore 48mm IDA open to 52's includes parts and labor for a pair of carbs. $ 475
Open float bowls for extra fuel $40 each.
Bore 2x carbs to 52mm, open bowls, replace all 4 throttle bearings, drill 3rd hole progression port.
$549.99 for a pair of IDA carbs, Rebuild of carbs if needed not included.
WEBER CARB MANUALS
All you need to know about those great Weber Carbs.
Both contain tuning tips and rebuilding information.
Weber Tech Guide $19.99
How To “AII About Weber Carbs” $24.99
DELLORTO CARBS
Complete manual covering all aspects of Dellorto carbs,
a must have book if you run Dellorto’s.
7054 AII About Dellorto Carbs $19.99
