This kit is for mid engine use. This can be mounted on the front or rear of motor. (see pics) It is for off road use only.
We will custome bend the exhaust to what you like.

•Main header used for our Mid Engine kits.
Comes with "J" pipes. 18 gage with thick 3/8"
flanges, Polished Ceramic Coating.

•Mid kit comes with free external 38mm wastegate.
•"Y" pipe. 16 gage, ceramic coated. Connects the turbo to a set of your stock End castings. The "Y" pipe is 2" at the top and 1 5/8" on the ends
They come Polished Ceramic Coated.
For a new set of stock End castings add $69.99
For polished stock End castings add $109.99
• Exhaust pipe. 18gage 2x bend that exits out the rear of your rail.
Comes Polished Ceramic Coated.
For O2 sensor bung for rich/lean monitor like the LM1 add $30
For Crank Case E-Vac add$55. This will help stop your motor from producing extra blowby and oil leaks. Will keep your motor clean. Includes 1x Moroso Race Check Valve. Your turbo motor should have Sand Seal.
• Turbo. A New T3 or you can upgrade to T3/T4 turbo Click Here
For polished intake/compresser housing add $40
For Polished Ceramic coated turbo exhaust housing add $95
•Carb and manifold. Most of the Mid kits come with a Holley 500cfm two barrel carb. For the smaller combos like 1600 to 2007cc we will use the Holley 350cfm two barrel. All of our holleys come with boosted power valve that will increase the amout of fuel once on boost.
We install our " Turbo Adjust-A-Jet" in all Holley carbs so there is no changing of main jets, just turn a screw for full main jet controll.
For Outerwear cover for your Holley add $20

New for 2007!
All boots, clamps, fittings, hoses, nuts, bolts are included in this kit!

For more options on your kit ckick here